Mackie CR2-X BAR PRO, Owner'S Manual, Page: 8 / 14

8
CR2
-X B
AR PRO PREMIUM DE
SKT
OP PC SOUNDB
AR WITH BL
UET
OO
TH®
CR2-X BAR PRO PREMIUM DESKTOP PC SOUNDBAR WITH BLUETOOTH®
6. Phones Output
This 1/8" TRS connector supplies the output to stereo
headphones. The volume is controlled with the volume
slider on the top of the CR2-X Bar Pro. The signal to the
power amp is killed when headphones are connected.
The phones output is wired as follows, according
to standards specified by the AES (Audio Engineering
Society):
Stereo 1/8" TRS
Sleeve = Shield (Ground)
Tip = Left Channel
Ring = Right Channel
Warning: The headphone amp is loud and
could cause permanent hearing damage.
Even intermediate levels may be painfully
loud with some headphones. BE CAREFUL!
Always turn the volume knob all the way down before
connecting headphones. Then turn it up slowly as you
listen carefully.
CR2-X BAR PRO:
Right Side Panel Features
7. EQ Preset Switch
This is a momentary switch that cycles between
unique EQ modes: Music, Voice and Game.
Simply press this switch to cycle between the EQ
presets. A voice prompt announces which EQ
is currently selected.
• MUSIC EQ MODE – This mode features an upper
bass parametric scoop to reduce unwanted low
frequency color and adds boost to upper mid-range
and high frequencies.
• VOICE EQ MODE –
This mode is perfect
for applications where the desired output
is increased clarity and detail of intelligible
speech at low volumes. This is the setting
for listening to audio books, watching TED
talks and other motivational speeches.
• GAME EQ MODE –
This mode is full range,
but focuses on increased bass and brilliant high
frequencies. This is the setting that gamers will
want to select when saving the world from
the zombie apocalypse.
• À LA MODE – This mode features any of the
aforementioned EQ preset modes, but with
a scoop of ice cream.
8. Input Selector Switch and LEDs
This is a momentary switch that cycles between
the three input choices: USB, 1/8" and Bluetooth.
Simply press this switch to cycle between the input
selections. Each input selection is accompanied by a
different colored LED. A voice prompt announces which
input is currently selected.
• USB [Purple] – More information on page 7.
• 1/8" / Aux [Amber] –
More information on page 7.
• Bluetooth [Cyan] – More information on page 9.
All inputs may be connected
simultaneously, but only one input may
be selected at a time. There are no issues
when switching between sources.
This includes a device connected via Bluetooth.
Switching the source selection away from a connected
device (Bluetooth) to USB or 1/8" / Aux and back again
will not disrupt the Bluetooth connection, for example.
8
7
CR2-X BAR PRO: Front Panel Features
6