10
C300z.SPECIFICATIONS
System Specifications
Frequency Response (–3 dB)
55 Hz – 18 kHz
Frequency Range (–10 dB)
5 Hz – 0 kHz
Maximum SPL Long-term @ 1m
1 dB
Low-Frequency Crossover Type
dB/octave, time offset corrected
High-Frequency Crossover Type
dB/octave
Crossover Frequency
1800 Hz
Audio
Input Type:
Speakon®-style NL jack
1/-inch TS phone jack
Input Impedance
8 ohms
Power Handling
rms:
00 watts
music:
500 watts
peak:
750 watts
Operating Temperature Range
–10ºC to 5ºC
(1ºF to 11ºF)
Transducer Specifications
Low-Frequency Transducer
Diameter
1 in/00 mm
Voice Coil Diameter
.0 in/75 mm
Sensitivity
(1W@1m) 98 dB
Nominal Impedance
8 ohms
Power Handling
00 watts
Frequency Range
50 Hz – 000 Hz
High-Frequency Driver and Horn
Diaphragm Diameter
1.75 in/.5 mm
Exit Throat Diameter
1 in/.5 mm
Diaphragm Material
Titanium
Sensitivity
(1W@1m) 10 dB
Nominal Impedance
8 ohms
Power Handling
150 watts
Frequency Range
1000 Hz – 0000 Hz
Horn Type
Composite: Exponential and Conical
Mouth Size
1 in/05 mm W x 7 in/178 mm H
Horizontal Coverage
90º ±10º (1 kHz – 0 kHz)
Vertical Coverage
5º ±10º (.8 kHz – 0 kHz)
Safety Features
Over-Excursion Protection
Second-Order High-Pass Filter
Driver Protection
Dynamic protection for compression driver
Construction Features
Basic Design
Asymmetrical Trapezoidal
Enclosure Alignment
Sixth-Order
Material
Polypropylene
Finish
Grey, textured finish
Handles
One on each side, one on top
Mounting Methods
Integrated mounting points, M10
Two located on each side, top,
bottom, and rear of enclosure
Grille
Perforated metal with weather-
resistant coating
Physical Properties
Height
in/0 mm
Width
15. in/90 mm
Depth
1.8 in/7 mm
Weight
lbs/19.5 kg
Options
PA-A1 forged shoulder eyebolt hardware
(M10 x 1.5 mm x 0 mm)
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
“Mackie” and the “Running Man” figure are regis-
tered trademarks of LOUD Technologies Inc.
All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are
hereby acknowledged.
©00-008 LOUD Technologies Inc.
All Rights Reserved.
