Mackie 406M, Specifications

Page: 2 / 6

MIXER
PP
M
4
06
M
O F 6 P A G E S
PPM 406M
Powered Mixer
PPM 406M
Powered Mixer
O F 6 P A G E S
O F 6 P A G E S
PPM 406M
Powered Mixer
2 3
4
PPM 4
0
6M Technical Specifications
Main Mixer Section Rated Output
Main Mixer, Monitor, & Effects: +4 dBu
Maximum Main Mixer Section Output: +20 dBu
Maximum Input Levels
Mic Input: –20 dBu, Trim @ 0 dB (HI)
+20 dBu, Trim @ 40 dB (LOW)
Line Input: 0 dBu, Trim @ 0 dB (HI)
+40 dBu, Trim @ 40 dB (LOW)
Insert Input: +20 dBu
Tape Input: +20 dBu
Effects Return: +20 dBu
Power Amp In: +22 dBu
Input Sensitivity
Minimum Input Level to p4 dBu @ Main
Mixer Output
Mic Input:
–68 dBu
Insert Input: –28 dBu
Line Input: –48 dBu
Tape Input: –18 dBu
Effects Return: –18 dBu
Maximum Voltage Gain
Mic Input to
Insert Output: 40 dB
Tape Output: 60 dB
Main Mixer Output: 72 dB
Line Input to
Insert Output: 20 dB
Tape Output: 20 dB
Main Mixer Output: 52 dB
Tape Input to
Tape Output: 10 dB
Main Mixer Output: 22 dB
Effects Return to
Main Mixer Output: 22 dB
Monitor Output: 22 dB
Input Impedance
Mic Input: 3 k
Ω
, balanced
Insert Input: 10 k
Ω
, unbalanced
Line Input: 40 k
Ω
, balanced
Tape Input: 10 k
Ω
, unbalanced
Effect Return: 10 k
Ω
, unbalanced
Power Amp In: 10 k
Ω
, unbalanced
Mixer Section
Frequency Response
Mic Input to Main Mixer Output (Trim at 0 dB):
+0, –1 dB, 32 Hz to 20 kHz
+0, –3 dB, 16 Hz to 80 kHz
Mic Input to Power Amp Output @ rated power output:
+0, –1 dB, 32 Hz to 20 kHz
+0, –3 dB, 16 Hz to 55 kHz
Distortion
THD and SMPTE IMD; 20 Hz to 20 kHz
Mic Input to Main Mixer Output:
< 0.005% @ +4 dBu output
Mic Input to Power Amp Output:
< 0.15%, 250 mW to rated power
Common Mode Rejection Ration (CMRR)
60 dB @ 1 kHz, Trim @ 0 dB
Noise
20 Hz to 20 kHz BW (150
Ω
source impedance)
Equivalent Input Noise (EIN): –127 dBu
Residual Output Noise:
Main Mixer, Monitor, & Effects outputs
Channel & Master levels off –95 dBu
Main Mixer Output Noise:
Master @ nominal (–10 dB), all channels off –92 dBu
Master & 1 input channel @ nominal
(–10 dB & –20 dB), Trim @ 0 dB –85 dBu
Crosstalk
Adjacent Inputs or Input to Output: –90 dB @ 1 kHz
Fader Off –90 dB @ 1 kHz
Break Switch Mute –80 dB @ 1 kHz
Input Level Trim Control Range
0 to –40 dB
Phantom Power
+15 Vdc
Equalization
Rumble Reduction: 75 Hz, –18 dB/octave
Channel EQ:
High ±15 dB @ 12 kHz
Mid ±12 dB @ 2.5 kHz
Low ±15 dB @ 80 Hz
Graphic EQ (9 bands):
Q = 1.414, ISO octave centers
±15 dB @ 63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 kHz