background image

3

Owner’s Manual

Owner’

s Manual

Mackie Limited Warranty

This Limited Product Warranty (“Product Warranty”) is provided by LOUD Technologies Inc. 
(“LOUD”) and is applicable to products purchased in the United States or Canada through a 
LOUD-authorized reseller or dealer. The Product Warranty will not extend to anyone other 
than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”).
For products purchased outside the U.S. or Canada, please visit www.mackie.com/warranty to 
find contact information for your local distributor, and information on any warranty coverage 
provided by the distributor in your local market.
LOUD warrants to Customer that the product will be free from defects in materials and 
workmanship under normal use during the Warranty Period. If the product fails to conform 
to the warranty then LOUD or its authorized service representative will at its option, either 
repair or replace any such nonconforming product, provided that Customer gives notice of the 
noncompliance within the Warranty Period to the Company at: www.mackie.com/support or 
by calling LOUD technical support at 1.800.898.3211 (toll-free in the U.S. and Canada) during 
normal business hours Pacific Time, excluding weekends or LOUD holidays. Please retain the 
original dated sales receipt as evidence of the date of purchase. You will need it to obtain any 
warranty service. 
For full terms and conditions, as well as the specific duration of the Warranty for this product, 
please visit www.mackie.com/warranty.
The Product Warranty, together with your invoice or receipt, and the terms and conditions 
located at www.mackie.com/warranty constitutes the entire agreement, and supersedes any 
and all prior agreements between LOUD and Customer related to the subject matter hereof. 
No amendment, modification or waiver of any of the provisions of this Product Warranty will 
be valid unless set forth in a written instrument signed by the party to be bound thereby.

Please keep your sales receipt in a safe place.

Summary of Contents for 402-VLZ3

























Reviews: