6
OPERATION MANUAL
ADDITIONAL SAFETY FOR MANUAL BENDING ROLLS
Safety glasses must be worn when
operating this equipment
Dust mask must be worn when operating
in high dust areas.
Long and loose hair must be contained
when operating this equipment.
Safety footwear must be worn when
operating this equipment
Close fitting/protective clothing must be
worn when operating the machine
Hearing protection must be used when
operating in a noisy environment
DO NOT use this machine unless you have been instructed in its safe use and
operation and have read and understood this manual
PRE-OPERATIONAL SAFETY CHECKS
Locate and ensure you are familiar with all machine operations and controls.
Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or
faulty.
Working parts should be well lubricated and the rolls free of rust and dirt.
Check workspaces and walkways to ensure no slip/trip hazards are present.
Be aware of other people in the area and ensure the area is clear before using equipment.
OPERATIONAL SAFETY CHECKS
Adjust both ends of the rollers evenly.
Take care during the initial feeding of the workpiece into the rolls.
Hold the workpiece sufficiently far back from the edge being fed into the rolls, to allow for the
in-feed speed of the machine.
Wind handle at a slow even rate. Be aware of rotating rollers.
Only one person may operate this machine at any one time.
ENDING OPERATIONS AND CLEANING UP
Ensure the handle is left in a safe position after use.
Leave the work area in a safe, clean and tidy state.
DON’T
Do not use faulty equipment. Immediately report suspect machinery.
Do not attempt to roll material beyond the capacity of the machine.
Do not attempt to bend rod or wire in bending rolls unless the rolls are grooved for this
purpose.
POTENTIAL HAZARDS AND INJURIES
r
Sharp edges and burrs.
r
Crush and pinch points.
r
Hair/clothing getting caught in moving machine parts.
r
Operator’s hands may be caught and drawn into the counter-rotating rollers.
