background image

Dear customer, 
we wish you a pleasant and successful working experience with your 
new  machine. 

We recommend  
that you read through the entire operating instructions before putting 
into operation. 

 

 
 
 
 
 
 
 
 
 
 

Read the instructions manual:  
Before  installing,  putting  into  use  or  undertaking  work  on  the 
compressor, read the instructions manual carefully.  

Dangerous Voltage  
Caution!  Switch  off  current  entry  on  compressor  before  each 
contact.  

Danger due to hot surfaces  
Caution! There are some parts of the compressor that can get very 
hot.  

‹

 

These operating instructions are to assist you in getting to know your 
machine. The operating instructions contain important notes on how you 
work with the machine safely, expertly, and economically, and how you can 
avoid  hazards,  save  repair  costs,  reduce  downtime  and  increase  the 
reliability and service life of the machine. 

‹

 

In  addition  to  the  safety  requirements  contained  in  these  operating 
instructions, you must be careful to observe your country’s applicable 
regulations. 

‹

 

The operating instructions must always be near the machine. 

‹

 

Put them in a plastic folder to protect them from dirt and humidity. 

‹

 

They must be read by every operator before beginning work and observed 
conscientiously.  

‹

 

Only persons who have been trained in the use of the machine and have been 
informed of the various dangers may work with the machine. 

‹

 

The required minimum age must be observed. 

‹

 

In  addition  to  the  safety  requirements  contained  in  these  operating 
instructions  and  your  country’s  applicable  regulations,  you  should 
observe the generally recognized technical rules concerning the operation 
of woodworking machines. 

 

 

2

Summary of Contents for DC-1













Reviews: