MachineryHouse AL-346V, Instruction Manual

Page: 36 / 82

- 34 -
Figure 53 Figure 54
Figure 55 Figure 56
Recommended oil types
Headstock.....................ISO 32#
QC gearbox .................ISO 68#
Apron ...........................ISO 68#
To add oil to the reservoirs:
1. Clean the area around the fill plug clean to prevent debris from falling in the reservoir when adding oil.
2. Remove the fill plug.
3. Slowly add oil until the oil level is centered in the sight glass.
4. Replace fill plug.
Changing oil
The oil in the reservoirs must be changed after the first three months of operation, then twice a year after that. If the
lathe is under heavy use, more frequent oil changes will be required to keep the gearboxes clean and ensure long
machine life. Some lathe owners believe that by using full synthetic oils in the gearboxes is a way to extend oil
change intervals. We do not recommend this practice. While synthetic oils are superior this lathe does not use a filter
to remove contaminants that are generated during normal use, such as when shifting gears. Changing the oils on a
frequent basis to flush out moisture and contaminants is still the best option to ensure long gearbox life.
Headstock oil Capacity ...........................4 liters
QC gearbox oil Capacity ........................2 liters
Apron oil Capacity ..................................1 liter
Headstock
Fill Plug
Headstock
Drain Plug
Gear Box
Fill Plug
Gear Box
Drain Plug
Headstock
Sight Glass
Gear Box
Sight Glass
Page 36 Instructions Manual for AL-346V (L555D) 01/09/2017