- 3 -
ENGLISH
4. INSTALLATION
If your appliance is not accompanied with a stove put it on a stiff table with fl at surface. If it is supplied in
combination with a stove put it on fl oor with fl at surface and adjust its level by turning the adjustable legs.
Take care that your appliances are in a distance at least 15cm from the nearest wall.
Special care must be taken that fl ammable objects (curtains, wooden, decoration etc.) are not near or above the
unit.
-
Before you put in operation for the very fi rst time remove the plastic coating from the stainless steel surfaces.
Electric power supply must be 230V 50 Hz per line.
Be sure that the unit is well earthed.
Our electric grill rooms can be wired with one or two or three lines and neutral. (3L + N or 2L+N or L + N).
Connections must be done according the diagrams and wires size as they are given in the next page.
Every line supplying your appliances must have its own fuse and switch with contact separation at least 3 mm.
This way they can be isolated from mains if required.
NOTE THAT ALL ELECTRICAL WORKS MUST BE CARRIED OUT ONLY BY A QUALIFIED ELECTRICIAN.
4.1 WIRING
THIS WORK MUST BE CARRIED OUT ONLY BY A QUALIFIED ELECTRICIAN.
Electrical terminal is located on the bottom of the right panel, behind the switchboard. Remove the cover and con-
nect to one or two or three lines according the diagrams:
Wire sizes and fuses must be according the following board for the respective model of electric grill room:
MODEL
POWER
LINES
FUSE (PER LINE)
CABLE
T 16
4,5 KW
1
16 A
RN -F 3G4
