Mach 403.002, Installation, Use And Maintenance Manual, Page: 13 / 22

13
403002-04-05-07-08-09-10_en_ma_201
1
USING THE MACHINE
LOADING THE PRODUCT ON THE TRAY AND SLICING
ƒ
Ascertain that the thickness control knob is correctly positioned to '0'.
ƒ
Draw back the carriage completely (towards the operator) to loading position.
ƒ
Lift the product grip by pulling it away by 10 cm from the blade and put it in rest
position.
ƒ
Lay the product to be sliced against the wall on the operator side.
ƒ
Secure by means of the product grip by exerting a slight pressure.
ƒ
Adjust the thickness gauge. Start the blade by pressing on the green button.
ƒ
Grip the handle affixed onto the plate and start the forward and backward cutting
movement. The product travels towards the gauge plate by gravity.
ƒ
When the product weight or its dimensions do not provide a satisfactory cut by effect
of the gravity, use the product grip handle.
ƒ
When finished, return the thickness control knob to '0' and draw the carriage back.
ƒ
Stop the blade by pressing the red button.