CAN FD LIN Gateway - User Manual
MACH SYSTEMS s.r.o.
Page
12
of
18
b.
UART (using USB to TTL UART converter) to the debug header X2
c.
RS-232 over pins 4, 8 and 5 (RxD, TxD and Gnd, respectively)
5.
Further, the steps are very similar for all the ports. In the
STM32CubeProgrammer
:
a.
Click on the refresh arrows button to see available ports
b.
Select the interface (USB or UART)
c.
Select the correct port
d.
You do not have to change the UART settings provided that the baud rate is lower or
equal to 115200. Procedure of connecting to the USB is almost identical.
e.
Click connect. You will see screen similar to this one.
