NF4-A9A / NF4 Ultra-A9A
17
Primary / Secondary /Master / Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4)
for each of the IDE devices that the onboard IDE interface supports. Modes 0
to 4 will increase performance progressively. In Auto mode, the system
automatically determines the best mode for each device.
The Choices: Auto
(default), Mode0, Mode1, Mode2, Mode3, Mode4.
Primary / Secondary /Master / Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by the
IDE hard drives in your system. As well, your operating environment
requires a DMA driver (Windows 95 OSR2 or a third party IDE bus master
driver). If your hard drive and your system software both support Ultra
DMA/100, select Auto to enable BIOS support.
The Choices: Auto
(default), Disabled.
IDE DMA Transfer Access
The Choices: Enabled
(default), Disabled.
Serial-ATA A
Enables support for Serial-ATA A.
The Choices: Enabled
(default), Disabled
Serial-ATA B
Enables support for Serial-ATA B.
The Choices: Enabled
(default), Disabled
IDE Prefetch Mode
The Choices: Enabled
(default), Disabled.
RAID Config
RAID Enable
The choices: Disabled
(default), Enabled.
SATA A/B Primary RAID
The choices: Disabled
(default), Enabled.