7
Please note:
• If signal strength “
” show blue, mean work fine.
• if signal strength “
” show red, should be some problem.
From this page, can see there are Internet Settings, Wireless Repeater,
Wireless Coverage operation mode, user can choose the right operation
mode based on needs.
A.
Internet Setting: In this mode, the device is supposed to connect to
internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN
ports share the same IP to ISP through WAN port. Then connection type
can be setup in WAN page by using PPPoE, Diynamic IP or Static IP.
Click Internet Settings, then will see following page, pls choose dyna-
