Mach Power BP-LBSW2D-013, User Manual, Page: 6 / 46

6
or a specialist workshop.
• If you have further questions that are not answered in these instructions for use,
contact our technical customer service or other specialists.
Note : To disconnect the USB cable from the barcode scanner, insert a pin such as a
folded paper clip into the small hole above the connector and pull the USB cable out
of the socket at the same time.
Before using the barcode scanner, follow the instructions on the scanner settings
in the “Settings” section.
• Open a document on your computer where the bar code can be read. The barcode
is inserted where the cursor is flashing.
• Position the barcode scanner reading unit at a sufficient distance and with a slight
angle to the barcode. The distance between the reading unit and the bar code must
be adapted based on the dimensions and specifications of the code (see paragraph
Reading angle).
• To read the barcode, press the scan button. If the reading has been successful, you
will hear an acoustic signal.
Tips
• Make sure the barcode to be read is clean.
• The bar code to be read must be completely visible.
• Maintain the angle of inclination and distance.
• Hold the reader unit horizontally with respect to the bar code.
• Each time you turn it back on, check the settings to prevent false results.