Page | 8
Maintenance
Check main belt tension:
Maintaining the proper belt tension is
essential to good machine performance and
service life. Operating the machine with an
improper belt tension can damage machine
components.
Check belt tension whilst power is off.
1.
Belt tension should only be adjusted
when the belt touches the
underside of the main frame.
2.
To adjust, loosen the two 10mm
nuts under the bolt covers at base of
machine.
3.
Turn the long 8mm bolt clockwise,
repeat on both sides of conveyor
evenly until correct tension is
achieved.
4.
Tighten two 10mm nuts.
____________________________________
Observe and Obey:
Only routine maintenance items specified
in this manual shall be performed by the
operator.
Scheduled maintenance inspections shall
be completed by qualified service
technicians, according to the
manufacturer's specifications and the
requirements specified in the
responsibilities manual.
Maintenance symbols legend:
The following symbols have been used in
this manual to help communicate the
intent of the instructions. When one or
more of the symbols appear at the
beginning of a maintenance procedure, it
conveys the meaning below.
Indicates tools will be needed to carry out
this operation.
Scheduled Maintenance
Maintenance performed quarterly and
annually must be completed by a person
trained and qualified to perform
maintenance on this machine according
to the procedures found in the service
manual for this machine.
Machines that have been out of service
for more than three months must
receive the quarterly inspection before
they are put back into service.
_________________________________
