Mace MacePro MPC-IRVD-2812, User Manual, Page: 4 / 8

4
POWER AND VIDEO OUTPUT JACK
A center pin positive barrel connector is available for AC or DC voltage (12vdc or 24vac).
A BNC connector provides an analog video output.
INSTALLATION
1. Install the camera on the bracket and tighten screws.
2. Connect the 75Ω coaxial cable to a DVR or Monitor input.
3. Attach the power cable.
4. Adjust the camera position and angle to cover the desired field of view.
Note: The camera is supplied with the focus pre-set, however, lens focus
may be adjusted if needed.
ZOOM
Adjust varifocal lens to obtain
proper view.
FOCUS
Focus adjustment available if
object is out of focus.
119.0
mm
ZOOM FOCUS
82.5
mm
119.0
mm
ZOOM FOCUS
82.5
mm
ZOOM FOCUS