Mace HydroMace XCi, Product Manual, Page: 47 / 270

After completing the wiring, configure the sensor using (see Add a new "Binary" channel type or
Add a new "Input pulse total" channel type )
Shaft encoder input
Each I/O card provides one input for connecting a shaft encoder. The shaft encoder input terminals available
on each I/O card are shown in the diagram.
NOTE: If a shaft encoder input is wired only a single digital/counter input is
available. NO frequency input is available
After completing the wiring, configure the sensor using (see Add a new "Shaft encoder input" input
type )
NOTE: Should the field application require a shaft encoder and a frequency input
another I/O card (Part No. 850-329) should be purchased
MACE XCi User Manual - 47 -