Mace HydroMace XCi, Product Manual, Page: 168 / 270

"Shaft encoder input" - channel type
Add a new "Shaft encoder input" input type
1. In the “ New channel
” dialogue box select the “
I/O Card
” from which the named channel will receive
its value.
NOTE: As a particular " Cards " input/s becomes fully utilised the card will no
longer appear on the “ Select card ” list.
2. Click “ Continue ” and a new dialogue box will appear with the available input types listed.
3. Select the " Shaft encoder " input type from the “ I/O Card @ Slot # ” list. Click “ Continue ” and then
select " Digital input #1 ".
NOTE: Only " Digital input #1 " can be used for " Shaft encoder " input types
MACE XCi User Manual - 168 -