17
Chapter 3 System operation
1.
Start/close the recorder
1.1
Start the recorder
Plug in the power line; switch on the power button at the back of the recorder; power indicator light on; DVR starting; default
nine windows for the video output; enter the menu mode automatically; If the starting time is within the timing recording time, the
system will start the timing recording function automatically. Channel indicator light on, system work in a normal manner.
Note: if the system stops at the starting image of HDD detection, the HDD may not be installed right and please check the
HDD connection.
1.2 Enter the setting menu
Before you enter the menu, you must input the password. There are two levels of password
—
user password and advanced
password
User password 666666
If input user password, you have to input again at the next login; you are also not allowed to enter system setting and
admin setting.
Advanced password 888888
Note: For the consideration of security, please change the setting in
admin setting
refer to Chapter 4
— —
Menu operation.
1.3
Close the recorder
*Please plug off 220VAC power during HDD installation*
Press the POWER key on the front panel for 4 seconds to stop the current work. Then switch off the power button at the
backside to turn off the power.
1.4
Power off recovery
When the power is cut off in the state of normal/timing/alarm recording, the recorder will preserve the current state and recover
the last state at the next restart. The state indicator light is the same as it was before the power off.
