3.19
Unplugging the Mower Conditioner
DANGER
Stop tractor engine and remove key before removing plugged material from mower conditioner. A child or
even a pet could engage the drive.
1. Stop forward movement of the tractor and stop the
power take-off (PTO).
2. Raise the mower conditioner fully, shut down the tractor
engine, and remove the key.
3. Engage lift cylinder lock-out valves.
WARNING
Wear heavy gloves when working around cutterbar.
4. Open cutterbar doors and clean off cutterbar or rolls
by hand.
Figure 3.116: Cutterbar Doors
169820
101
Revision A
