215276
9
Revision A
3.1.1
Installing Hydraulic Components
–
M205 With Quick Couplers
NOTE:
Union fittings (MD #252232) supplied in the kit are
NOT
used on M205 Windrowers equipped with quick couplers.
1033005
A
B
C
D
Figure 3.7: M205 equipped with Quick Couplers
1.
Install female coupler (A) (MD #138345) onto header
PRESSURE
hose (B).
2.
Install male coupler (C) (MD #138344) onto header
RETURN
hose (D).
A
B
D
E
H
G
C
F
1033016
Figure 3.8: Header Pressure and Return Connections
3.
Connect
PRESSURE
coupler (A) to inboard steel line
coupler (B).
NOTE:
For reference, the other end of the pressure hose is
connected to split flange clamp (C) on the hydraulic motor.
4.
Connect
RETURN
coupler (D) to outboard steel line
coupler (E).
NOTE:
For reference, the other end of the return hose is
connected to fitting (F) on the hydraulic motor.
5.
Close coupler lock assembly (G) over couplers and secure
with pin (H).
