215276
5
Revision A
Chapter 3:
Installation Instructions
To install the M205 Compatibility Kit (MD #257188), follow these procedures in the order presented:
3.1
Installing Hydraulic Components
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
IMPORTANT:
Ensure the R113 SP header is lowered from shipping position. For instructions, refer to the unloading and assembly
instructions shipped with the header.
1.
If a header is connected to a windrower:
a.
Lower the header fully.
b.
Shut down the engine, and remove the key from the ignition.
c.
Headers other than the R113 SP: Disconnect the header hydraulic hoses and any electrical connections to the
windrower.
