MacDon R113 SP, Operator'S Manual

Page: 181 / 240

215009
167
Revision A
4.9.5 Installing Cutterbar Inboard Curtain
1021476
A
Figure 4.135: Cutterbar Doors
–
R113 Shown
1. Open cutterbar doors (A). For instructions, refer to 3.7.1
Opening Cutterbar Doors
–
North America, page 64 .
1020988
B
B
A
Figure 4.136: Inboard Curtain
2. Install curtain onto weld and bolt studs on center shield,
install two curtain brackets (B), and secure with four
nuts (A).
3. Torque hardware to 28 Nm (21 lbf·ft).
IMPORTANT:
To avoid damaging bolt studs, do NOT overtighten the nuts.
1020990
B
A
Figure 4.137: Inboard Curtain
4. Secure two curtain brackets (A) to center shield using two
M10 carriage head bolts (B) and nuts.
5. Torque bolts (B) to 39 Nm (29 lbf·ft).
MAINTENANCE AND SERVICING