MacDon R113 SP, Operator'S Manual

Page: 120 / 240

215009
106
Revision A
Removing Cutterbar Discs
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage windrower lift cylinder safety props before going under machine for any reason.
CAUTION
Discblades have two sharp cutting edges that can cause serious injury. Exercise caution and wear gloves when working
with blades.
1. Raise the header fully.
2. Shut off the engine, and remove key from the ignition.
3. Engage windrower lift cylinder safety props. For instructions, refer to 3.3 Engaging and Disengaging Header Safety
Props, page 24 .
1021476
A
Figure 4.19: Cutterbar Doors
–
R113 SP
4. Open cutterbar doors (A). For instructions, refer to 3.7.1
Opening Cutterbar Doors
–
North America, page 64 .
MAINTENANCE AND SERVICING