215333
55
Revision A
3.8.2
Detaching from Two-Point Hitch
WARNING
•
To prevent accidental movement of tractor, shut off engine, engage parking brake, and remove key.
•
To maintain stability, always lower the machine completely. Block the Rotary Disc Pull-Type wheels before
detaching from tractor.
1.
Park the machine on a flat, level surface.
2.
Lower the pull-type onto blocks or leave the pull-type raised. If leaving the pull-type in the raised position, close the lift
cylinder safety valves. Refer to
.
3.
Shut down the engine, and remove the key from the ignition.
4.
Move remote cylinder control valve lever back and forth to relieve stored hydraulic pressure.
If the transport is installed:
1023702
B
A
Figure 3.48: Control Box
5.
Disconnect the power wires from control (A).
6.
Roll up cable (B) and attach control box (A) to the hitch
with the magnet on the back of the control box.
