215333
14
Revision A
1.9
Understanding Safety Signs
1000931
Figure 1.25: MD #113482
MD #113482
General hazard pertaining to machine operation and servicing
DANGER
To prevent injury or death from improper or unsafe machine
operation:
•
Read the operator
’
s manual and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
•
Do
NOT
allow untrained persons to operate the machine.
•
Review safety instructions with all Operators every year.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of machine before starting
engine and during operation.
•
Keep riders off the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage header drive, put transmission in Neutral, and
wait for all movement to stop before leaving operator
’
s
position.
•
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
•
Engage safety locks to prevent lowering of raised unit before
servicing in the raised position.
•
Use slow moving vehicle emblem and flashing warning lights
when operating on roadways unless prohibited by law.
1000706
Figure 1.26: MD #166466
MD #166466
High-pressure oil hazard
WARNING
To prevent serious injury, gangrene, or death:
•
Do
NOT
go near leaks.
•
Do
NOT
use finger or skin to check for leaks.
•
Lower load or relieve hydraulic pressure before loosening
fittings.
•
High-pressure oil can easily puncture skin, and can cause
serious injury, gangrene, or death.
•
If injured, seek emergency medical help. Immediate surgery
is required to remove oil.
