215333
243
Revision A
1008473
A
Figure 4.249: Driveline Shield Cone
13. Slide the shield cone to the gearbox and secure with two
lever clamps (A).
Adjusting Clutch
1008473
A
Figure 4.250: Driveline Shield Cone
1.
Release two lever clamps (A) on the shield cone installed at
the header swivel gearbox.
2.
Slide shield away from gearbox.
1022510
A
Figure 4.251: Clutch Bolts
3.
Back off all pressure plate tensioning nuts (A) one and a
half revolutions.
NOTE:
If this has already been done, you are not required to do
it again.
