215333
236
Revision A
4.5.6
Clutch Driveline
1010764
A
Figure 4.233: Clutch Driveline
The clutch driveline (A) transfers power from the hitch driveline
to the header swivel gearbox through a clutch mechanism.
Replace the driveline if there are signs of damage, excessive
vibration, excessive noise, or if the clutch needs replacing.
Follow regular lubrication procedures and ensure all driveline
taper pins are torqued as instructed. For instructions, refer
to
4.4.3 Lubricating Cutterbar, page 146
and
Driveline Taper Pins, page 248
.
Perform run-in procedure as part of the rotary disc pull-type
’
s
initial break-in procedure, when clutch friction linings have been
replaced, or when the unit has not been operated in 6 months.
For instructions, refer to
Checking Clutch Operation, page 241
.
