215333
8
Revision A
1.7
Safety Signs
1000694
Figure 1.16: Operator
’
s Manual Decal
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or illegible.
•
If the original part on which a safety sign was installed is
replaced, be sure the repair part displays the current
safety sign.
•
Replacement safety signs are available from your MacDon
Dealer Parts Department.
1.7.1
Installing Safety Decals
1.
Clean and dry the installation area.
2.
Decide exactly where you are going to place the decal.
3.
Remove the smaller portion of the split backing paper.
4.
Place the decal in position and slowly peel back the remaining paper, smoothing the decal as it is applied.
5.
Prick small air pockets with a pin and smooth out.
