215333
121
Revision A
4.2
Preparing Machine for Servicing
CAUTION
To avoid personal injury, perform the following procedures before servicing rotary disc pull-type or opening drive
covers:
1.
Lower the rotary disc pull-type fully. If you need to perform service in the raised position, and always close lift cylinder
lock-out valves. For instructions, refer to
3.1 Lift Cylinder Lock-Out Valves, page 31
.
2.
Disengage power take-off (PTO).
3.
Shut down the engine and remove the key from the ignition.
4.
Engage park brake.
5.
Wait for all moving parts to stop.
