MacDon PW8, Operator'S Manual

Page: 67 / 304

214657
53
Revision A
Detaching from John Deere 60, 70, S, and T Series Combine
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1. Choose a level area, and position the header slightly off the ground.
2. Stop the engine and remove the key from the ignition.
Figure 3.47: Releasing Multicoupler
3. Pull out knob (A) on combine multicoupler, and move
handle (B) toward feeder house to release coupler (C)
from combine and to retract locking pins at base of
feeder house.
Figure 3.48: Replacing Coupler
4. Lower handle (A) on header, and position coupler (B)
onto header as shown.
OPERATION