MacDon PW8, Operator'S Manual

Page: 56 / 304

214657
42
Revision A
3.10 Header Attachment and Detachment
This section provides instructions for attaching/detaching the PW8 Pick-Up Header to/from the combines listed in
Table
3.2, page 42 .
Table 3.2 Attaching PW8 Header to Combine
Combine Refer to
Case IH 3.10.1 Case IH, page 42
John Deere 60, 70, and S Series 3.10.2 John Deere 60, 70, S, and T Series, page 49
New Holland CR and CX 3.10.3 New Holland CR/CX Series Combine, page 56
Versatile 3.10.4 Versatile, page 61
3.10.1 Case IH
This section provides instructions for attaching/detaching the PW8 Pick-Up Header to/from Case IH 50/60/7088,
51/61/7130, 51/61/7140, 70/8010, 71/81/9120, 72/82/9230, and 72/82/9240 combines.
Attaching to Case IH Combine
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Figure 3.21: Feeder House Locks
1. Pull handle (A) on combine to raise hooks (B) on both
sides of the feeder house.
OPERATION