MacDon MD 259140, Installation Instructions Manual

Page: 24 / 34

214913
18
Revision B
3.7 Installing New Left Drum Assembly, Shields, and Driveline
To install the new clockwise drum assembly, shields, and driveline provided in the kit, follow these steps:
WARNING
Wear heavy gloves when working around or handling knives. Blades are sharp and can cause serious injury.
NOTE:
Unless otherwise stated, all parts are provided in the kit.
1. Remove the remaining parts from the kit.
1026175
A
Figure 3.19: Clockwise Spindle
2. Ensure spacer (A) is on spindle.
1026166
A
Figure 3.20: New Clockwise Drum Assembly
Positioned on Spindle
3. Position the new clockwise drum assembly (MD #257085)
over the exposed spindle. The disc must be positioned at a
90-degree angle relative to neighboring discs.
4. Use an 18 mm deep socket to install four M12 bolts (A)
(MD #281697) and washers (MD #246952), securing the
drum assembly to the spindle.
5. Torque to 85 Nm (63 lbf·ft).
INSTALLATION INSTRUCTIONS