215794
80
Revision A
1011841
CXXX
EXXX
SET TIRE SIZE?
18.4 X 26 TURF
D
C
B
A
Figure 5.50: Tire Size
4.
Press SELECT (D) until SET TIRE SIZE? appears on the
upper line.
•
The current tire size setting will appear on the
lower line.
NOTE:
The following tire size options are available:
•
18.4 x 26 TURF
•
18.4 x 26 BAR
•
23.1 x 26 TURF
•
600
–
65 R28
5.
Press left arrow (B) or right arrow (C) and select the desired
tire size. Press SELECT (D).
6.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next WINDROWER SETUP
option.
5.3.16
Setting Engine Intermediate Speed Control
The engine
’
s Intermediate Speed Control (ISC) feature provides three selectable engine speeds (1900, 2050, or 2200 rpm)
for reduced load conditions. This setting can be configured in the windrower
’
s cab display module (CDM) by accessing the
WINDROWER SETUP menu.
NOTE:
The engine
MUST
be running for this procedure to be performed.
1011786
CXXX
EXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 5.51: CDM Programming Buttons
1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (C) on the cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? will appear on the upper line.
•
NO/YES will appear on the lower line.
3.
Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? will appear on the upper line.
