215794
54
Revision A
4.14
Starting Engine
The procedure for starting the windrower
’
s engine varies depending on the ambient temperature. In cold weather, the
engine must go through a warm-up cycle before the engine speed can be increased.
CAUTION
Park on a level surface with the ground speed lever (GSL) in the N-DETENT position and the steering wheel in the
locked (centered) position. Wait for the cab display module (CDM) to beep and display an
“
In Park
”
message to confirm
that the parking brake is engaged.
1.
Ensure that there is sufficient diesel exhaust fluid (DEF) in the DEF tank. This will prevent DEF level errors from
occurring.
1026121
A
Figure 4.25: Operator Console
2.
Ensure that lock (A) is engaged at the cab-forward or
engine-forward position.
1011482
A
B
Figure 4.26: Operator Console
3.
Move GSL (A) into the N-DETENT position.
4.
Turn the steering wheel until it locks (center).
5.
Push header drive switch (B) to the OFF position.
DANGER
Ensure that all bystanders have cleared the area.
