MacDon M155, Installation Instructions Manual

Page: 35 / 70

Introduction
This kit is designed to update some components on the M155 E4 2014 and 2015 model. This document explains
how to install the kit. A list of parts included in the kit is provided in Chapter 2 Parts List, page 5 .
Installation Time
This kit will take approximately 12 hours to install.
Conventions
The following conventions are used in this document:
• Right-hand (RH) and left-hand (LH) are determined from the operator’s position, facing forward with the windrower
in cab-forward position.
• Unless otherwise noted, use the standard torque values provided in the windrower operator’s manual and
technical manual.
NOTE:
Keep your MacDon publications up-to-date. The most current version of this instruction can be downloaded from
our Dealer-only site (
https://portal.macdon.com ) (login required).
NOTE:
This document is not currently available in any language except English.
167730
i
Revision B