215676
441
Revision A
1006261
B
C
A
Figure 5.218: Forked Caster Wheel
3.
Remove eight wheel nuts (A) securing axle (B) to wheel (C).
4.
Separate axle (B) and wheel (C).
Installing Forked Caster Wheel
The caster wheel will need to be attached to the axle assembly before it can be installed on the windrower.
CAUTION
A wheel assembly is heavy. Support the wheel assembly before removing the axle bolts.
1006261
B
C
A
Figure 5.219: Forked Caster Wheel
1.
Position wheel assembly (C) on axle assembly (B). Install
wheel nuts (A).
2.
Torque wheel nuts (A). For instructions, refer to
Caster Wheel Hardware, page 437
1006260
A
B
C
D
E
Figure 5.220: Forked Caster Wheel
3.
Position wheel assembly (D) in forked caster (E).
4.
Position cover plates (C) as shown and install eight bolts (A)
(four on each side of caster) to secure axle (B) to caster (E).
Torque the bolts to 102 Nm (75 lbf·ft).
5.
Lower the caster wheel. For instructions, refer to
