215676
397
Revision A
1000845
A
Figure 5.139: Headlight
9.
Position the headlight into the light receptacle, ensuring
that the housing is oriented correctly. Secure the housing
with screws (A). To align the headlights, refer to
Aligning Headlights
The headlights should be positioned so that they illuminate the area in front of the windrower without impairing the vision
of those facing the headlights.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
NOTE:
When aligning the headlights, a header should be attached to the windrower and raised. This will ensure that the
headlights are aligned for operating conditions.
1.
Park the windrower on level ground in front of a vertical surface such as a wall, so that the headlights sit 7.5 m (25 ft.)
away from the surface.
2.
Shut down the engine, and remove the key from the ignition.
