MacDon M1240, Operator'S Manual

Page: 274 / 488

MAINTENANCE AND SERVICING
5.6.6 Checking Engine Coolant Level
Check coolant level in the pressurized coolant tank daily.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
NOTE:
Ensure the engine has cooled down prior to checking.
1. Shut down the engine, and remove the key.
2. Open the hood. Refer to 5.3.1 Opening Hood, page 244 .
3. The tank has a MAX and MIN COLD line marker.
Coolant level should be kept at the MAX COLD line (A).
NOTE:
When checking coolant level, use the MAX
COLD line on the side of tank that faces cab for
an accurate measurement.
NOTE:
For speci fi cations, refer to 5.1.3 Lubricants, Fluids,
and System Capacities, page 236 .
4. Close the hood. Refer to 5.3.2 Closing Hood, page
245 .
Figure 5.36: Coolant Tank
214053
262
Revision A