214735
46
Revision A
4.1.2
Checking Engine Air Intake
1015818
A
A
B
Figure 4.3: Engine Air Intake
1.
Check all engine air intake ducting (A) and joints for
looseness. Tighten hose clamps as required.
2.
Check that end cap (B) is secure and locked.
1023020
B
C
D
A
Figure 4.4: Constant Torque Clamps
3.
Check the three constant torque hose clamps (A) and
spring clamp (B) on turbocharger intake duct. Clamp (B)
is properly tightened when screw tip (C) extends
beyond housing and Belleville washers (D) are
almost flat.
4.1.3
Checking and Adding Engine Oil
NOTE:
Oil can be checked without opening the hood.
1022834
A
Figure 4.5: Dipstick Location
1.
Remove the dipstick (A) by turning it counterclockwise
to unlock.
2.
Wipe the dipstick clean and reinsert it into the engine.
