MacDon HC10, Original Instruction

Page: 78 / 242

215126
56
Revision A
1030905
A
Figure 4.7: Conditioner
–
Left Side
8. Remove nut (A) and the carriage bolt that attach the
conditioner to the lower left of the header.
1031003
A
B
E
D
C
Figure 4.8: Lift Arm
–
Left Side
9. Remove bolt and nut (A) attaching lift arm (B) to
bracket (C).
10. Loosen nut (D) enough to rotate bracket (C).
11. Remove L-pin (E) securing lift arm (B) to the conditioner.
NOTE:
Rotate pin (E) to align the key-hole slot.
12. Remove lift arm (B).
1031013
A
B
C
D
E
Figure 4.9: Conditioner
–
Left Side
13. Position lift arm (A) as shown and secure with latch (D).
14. Reattach lift arm (A) to bracket (B) using nut and bolt (C).
15. Tighten hardware (E) to secure bracket (B) to the
conditioner. Tighten hardware (C) to secure lift arm (A) to
bracket (B).
16. Repeat Step 9, page 56 to Step 15, page 56 for the other
lifting arm.
OPERATION