214325
79
Revision A
3.4
Completing Header Assembly
3.4.1
Attaching Cam Arms
To attach reel cam arms, follow these steps:
Figure 3.151: Disconnected Cam Links and
Shipping Wire
1.
Rotate reel manually until tine tube cranks (A) with
disconnected cam links are accessible.
2.
Remove shipping wires one row at a time.
NOTE:
To prevent reel cams from rotating over center, remove
shipping wires one row at a time.
Figure 3.152: Hardware Bag Right Reel
3.
Remove bag of hardware (A) from tine bar. It contains
hardware for cam links and endshields.
