MacDon DWA, Operation And Parts Manual

Page: 26 / 98

ASSEMBLY/SETUP INSTRUCTIONS
2.4 Installing the Hydraulics to M1240 Windrower
2.4.1 M1240 Disc-Only Configuration
To install the DWA hydraulics to a M1240 Self-Propelled Windrower configured for disc-only headers, follow
these steps:
Install the DWA linkage hydraulics to windrower.
1. Route hoses (A) underneath both filters as shown.
2. Connect linkage quick couplers (B) to quick couplers
on windrower frame (C).
NOTE:
Linkage and windrower have quick couplers
preinstalled for easy connection.
Figure 2.20: DWA Linkage Hydraulics
(Multicoupler Hidden for Clarity)
Install the DWA deck hydraulics to windrower.
3. Install 45° fittings (A) and torque to 125 N·m (90 ft·lbf).
NOTE:
Fittings need to be oriented at 60 degrees to the
frame as shown.
4. Install hoses (B) to 45° fittings ensuring that hose with
cable tie (C) is installed on the top fitting. Torque to
85 N·m (63 ft·lbf).
Figure 2.21: DWA Deck Hydraulics to M1240
(Multicoupler Hidden for Clarity)
214048
18
Revision A