169784
43
Revision H
3.12
Lights
Procedures for installing and connecting lights and electrical harnesses vary depending on the location of sale. Refer to the
appropriate procedures for your unit.
3.12.1
Installing Endshield Light
To install the endshield light, follow these steps:
1011716
A
B
C
D
Figure 3.62: Endshield Compartment with Endshield
Removed
1.
Remove endshield.
2.
Remove divider rods (A) (if installed) from storage location.
3.
Remove bolts (B) and bracket (C) from endsheet. Retain
hardware.
4.
Remove clip (D) that attaches wiring harness to endsheet.
Retain for reinstallation on reel arm.
1011715
B
A
Figure 3.63: Left Rear Light Assembly
5.
Retrieve right rear light assembly from transport kit.
6.
Loosen nuts (A) and remove lighting cover (B) from light
assembly.
Summary of Contents for D65
