169441
124
Revision D
4.3.6
Removing Non-Hinged Endshields
The non-hinged header endshields cover components. To access the components, you will need to remove the endshields.
ϭϬϯϵϵϰϴ
A
Figure 4.20: Inboard Side of Endsheet
1.
To open the endshield, press against the latch in the
opening at location (A) on the inboard side of the endsheet.
ϭϬϯϵϵϱϴ
Figure 4.21: Endshield Removed
2.
Lift the endshield up, then pull it out and back.
4.3.7
Installing Non-Hinged Endshields
ϭϬϯϵϵϱϵ
A
B
Figure 4.22: Endshield Removed
1.
Position the forward end of the endshield in crop
divider (A), and then position the endshield over the
endsheet. Pin (B) at the top of the endsheet must engage
the endshield.
Summary of Contents for D50
Page 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Page 124: ......
Page 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Page 296: ......