215184
137
Revision A
1010407
Figure 3.290: Partially Assembled Endshield
7.
Repeat Step
and Step
for
remaining segments leaving last segment uninstalled.
1010397
A
Figure 3.291: Partially Assembled Endshield on Reel
8.
Position partially assembled endshield onto reel.
9.
Remove two 3/8 x 3/4 in. long Torx
®
bolts (A) and retain for
reinstallation.
1010438
C
A
B
Figure 3.292: Last Segment
10. Position last segment over segment (A) and under first
segment (B).
NOTE:
If necessary, loosen hardware and use a pry tool to secure
last segment in place.
11. Engage endshield support tabs through segments, and
reinstall two 3/8 x 3/4 in. long Torx
®
bolts (C) removed in
Step
.