MAC215986
102
Revision A
1034027
A
A
Figure 3.104: Ultra Wide Configuration
To convert to Wide configuration from Ultra Wide
configuration:
One flighting kits (MAC357233 or MACB7344
55
) is required. You
will need to install two short flightings onto the existing welded
flightings (A). A total of 30 auger fingers is recommended for
this configuration.
•
For flighting installation instructions, refer to
•
If required to remove auger fingers, refer to
1033386
1
2
A
A
A
A
3
B
B
A
A
Figure 3.105: Auger Configurations
–
Rear View
1 - Narrow Configuration
2 - Ultra Narrow Configuration
3 - Wide Configuration
To convert to Wide configuration from Narrow or Ultra Narrow
configuration:
One flighting kit (MAC357233 or MACB7344
) is required. You
will need to replace existing long flightings (A)
56
with short
flightings (B) and install additional auger fingers. A total of 30
auger fingers is recommended for this configuration.
•
For flighting replacement instructions, refer to
and
.
•
For finger installation instructions, refer to
55. MAC357233 is available only through MacDon Parts. MACB7344 is available only through Whole Goods. Both kits
contain wear-resistant flightings.
56. The quantity of existing long flightings is either 4 or 8, depending on the current configuration.
