LB. 00151-00-GB
Pag. 30
02/08/06
MANUAL
CLEANING OF MILK FROTHER AND COFFEE OUTLET
PLEASE NOTE:
A?
Foam setting
The milk frother is equipped with a FOAM REGULATOR which sets the quantity of air needed for frothing milk.
Turn the ring nut clockwise for thicker foam (small bubbles), or turn it anticlockwise for more voluminous foam (large
bubbles)
(see diagram).
B?
Milk temperature setting
The milk frother is equipped with a MILK TEMPERATURE REGULATOR which reduces the quantity of sucked milk.
Turn the ring nut clockwise to increase temperature, or turn it anticlockwise to decrease temperature (see diagram).
2?
Remove the cover from the
coffee outlet
1?
Remove the screw that fix
the cover of the coffee outlet
4?
Disassemble the milk
frother in all its parts (first by
turning and then by pulling as
shown in the picture) and wash
it either by hand or in a
dishwasher. Make sure that all
the holes are free from milk
residues and also to use
provided tools to clean the
holes. Check also that the O-
rings are in good condition
5?
Reassemble the milk frother as indicated in
the assembling drawing
NT-00492
3?
Remove the milk frother
and the
coffee outlet
from its
holder
6?
Disassemble the
coffee outlet (1) and
wash it by hand or in a
dishwasher. Make sure
that all the holes are
free from any coffee
residues , and also to
use provided tools to
clean the holes.
