AMACAM AM-M81
USER MANUAL
Page 5
6.
BASIC OPERATION
6.1.
First set up
Before the camera is used the following actions must be taken. This should be
read in conjunction with the Menu Options description in Section of this User
Manual.
(Number references below refer to the Diagram and Key in Section 3 of this user
manual).
Insert a Micro SD-TF card into slot (12). Good quality, Speed rating Class 4,
4GB, 8GB, 16GB or 32GB are recommended.
Switch camera on by pressing Power button (10) once. (See below)
Set up Time Zone, date and time in settings (See Main Menu Section 7.1 below)
Set up Loop recording (See Main Menu Section 7.1 below)
Camera will now operate in default settings mode.
Power Button (10)
The Power button (10) is used to
switch the camera on (in manual operation)
o
Short press until indicator light illuminates. Release and wait for a few
seconds for the screen to turn on.
switch the camera off
o
Press and hold for at least two seconds, until screen switches off.
Reset after the camera has crashed or seized up
o
Press and hold the power button for at least 8-10 seconds to reset the
camera