DIM
MID
BRIGHT
How to use the KIDSNITELITE
Charging
To charge the night light, simply connect the Micro
USB end of the power cable to the back of the night
light and the USB-A end to any USB-A power
adapter (adapter not included).
Note: While charging, the battery status LED will
blink blue and then turn to solid blue when fully
charged. When battery level is low, the battery
status LED will turn red.
Lighting Control
• Press and release the action button to cycle
through the brightness levels (dim-mid-bright-off).
• Press and hold the action button to change the
light from warm white to cool white
• Quick double press to turn the light off
immediately
Attaching the lanyard
Slide the thin loop end of the lanyard into the
lanyard hole then pull the lanyard through the
lanyard loop
Using the plactic hook
Remove the protective film from the back of the
hook and firmly stick it to the wall, dresser, etc.
Hang the light on the hook.
NOTE: For a good adhesion, make sure the surface
is free of dirt and let the hook sit for 10-20 minutes
before placing the night light on it.