EN
24
In
more
detail...
MHT55050
by MacAllister
Problem
Possible cause
Solution
1. Product does
not start
1.1. Not connected to
power supply
1.2. Power cord or plug is
defective
1.3. Other electrical defect
to the product
1.1. Connect to power
supply
1.2. Check by a specialist
electrician
1.3. Check by a specialist
electrician
2. Product does
not reach full
power
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source
(e.g. generator) has
too low voltage
2.3. Air vents are blocked
2.1. Use a proper
extension cord
2.2. Connect to another
power source
2.3. Clean the air vents
3. Unsatisfactory
result
3.1. Blade is worn /
damaged
3.2. Thickness of branches
exceeds capacity
3.1. Replace with a new one
3.2. Only cut branches
complying with the capacity
4. Excessive
vibration or
noise
4.1. Blade is dull /
damaged
4.2. Bolts/nuts are loose
4.1. Replace with a new
one
4.2. Tighten bolts/nuts
Troubleshooting / Recycling and disposal
Troubleshooting
Recycling and disposal
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.
For further information visit www.recycle-more.co.uk.
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the
product is working properly. Recycle the package afterwards.
